Black Box LB320A LinkGain 1-Port Industrial Ethernet Extender

10BASE-T/100BASE-TX Ethernet Extenders use vDSL to provide an easy, inexpensive way to extend the reach of your Ethernet network over ordinary voice-grade copper wire or coax cable.

Just plug an extender into each end of your copper wire and use simple DIP switches to set one unit as local (CO) and the other as remote (CP)—there’s never any software to install. Plus, the RJ-45 port autosenses speed and duplex and features MDI/MDI-X for easy cabling.

For larger installations, you can mount the extenders in a convenient 16-slot rackmount chassis. The chassis has ventilation holes plus a fan to keep the extenders cool.

• Use a standalone or rackmount in the LinkGain Chassis (LB300A-RACK)
• Hot swap extenders in and out of the rack without having to power down the entire system
• Six speeds with easy-to-read speed indicator LEDs on top of the extender
• Ethernet ports are Auto MDI/MDI-X and autosensing for speed and duplex
• Dimensions 0.94"H x 3.16"W x 4.3"D (2.38 x 8.03 x 10.9 cm)
• Weight 0.33 lb. (0.15 kg)
• Six speeds with easy-to-read speed indicator LEDs on top of the extender
• Ethernet ports are Auto MDI/MDI-X and autosensing for speed and duplex
• Data Rate : 100 Mbps at 960 ft. (300 m); 80 Mbps at 1280 ft. (400 m): 60 Mbps at 1920 ft. (600 m); 40 Mbps at 2560 ft. (800 m); 20 Mbps at 3840 ft (1200 m); 1 Mbps at 8320 ft. (2600 m)
• Connectors : Ethernet Port: (1) 10/100BASE-TX port; Ethernet Extender Port: (1) RJ-11 and terminal block port