TRENDnet TPE-104GS Gigabit PoE Splitter (Version v2.0R)
• Compatible with PoE Switches & Injectors
• Supported IEEE Standards 802.3, 802.3ab, 802.3af, 802.3u, 802.3x
• PoE Power 48 VDC at 0.4 A (Input)
• Power Consumption 0.3 W
• Operating Temperature 32 to 113°F / 0 to 45°C
• Operating Humidity 0 to 90%
• Power Cable : 2.5 to 2.0/2.5mm
Trendnet TPE-104GS Gigabit PoE Splitter (Version v2.0R)
TRENDnet’s Gigabit PoE Splitter, model TPE-104GS, networks a non-PoE device in a remote location using a PoE network connection. The TPE-104GS splits a Gigabit PoE connection into separate power and Gigabit data sources. A convenient dip-switch adjusts output power to 5V, 9V, or 12V in order to match non-PoE device power requirements. The included combination 2.0 and 2.5mm jumper cable provides greater device compatibility.
No power adapter necessary; the TPE-104GS takes a PoE network connection, and splits power and data into separate connections to network a non-PoE device with power up to 100m (328 ft.).Convenient dip-switch adjusts voltage output to 5V, 9V, or 12V in order to match non-PoE device power requirements.
• Power a non-PoE device up to 100 meters (328 ft.) away
• Splits a gigabit PoE signal into separate power and gigabit data sources
• Adjustable voltage output supports 5V, 9V, or 12V devices
• Use this compact device with PoE switches or injectors
• Save on installation and equipment cost
• Full Duplex Gigabit speeds
• IEEE 802.3af PoE compatible
• 1 x Gigabit data/power port in
• 1 x Gigabit data out port
• 1 x DC Power out port
• LED indicators
• Adjustable output power DIP switch (5V, 9V, 12V)
• Data Transfer Rate : Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
• Data Transfer Rate : Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
• Data Transfer Rate : Gigabit: 2000Mbps (full duplex)