Supermicro MB MBDH12SSLNTO Socket SP3 AMD EPYC7002 Max2TB DDR4 PCIE ATX

• Mfr Part Number: MBD-H12SSL-NT-O
• CPU: Single AMD EPYC 7002 Series Processor; Socket SP3
• Cores: Up to 64 Cores
• Chipset: System on Chip
• Memory Capacity: 8 DIMM slots; Supports up to 2TB Registered ECC DDR4 3200MHz SDRAM; 8-channel memory bus
• Memory Type: DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
• DIMM Sizes: 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
• Memory Voltage: 1.2V
• Error Detection: Corrects single-bit errors; Detects double-bit errors (using ECC memory)
• SATA: SATA3 (6 Gbps)
• IPMI: Support for Intelligent Platform Management Interface v. 2.0; IPMI 2.0 with virtual media over LAN and KVM-over-LAN support; ASPEED AST2500 BMC
• Network Controllers: Dual 10GBase-T LAN via Broadcom BCM57416; 1 Realtek RTL8211F PHY (dedicated IPMI)
• VGA: ASPEED AST2500 BMC
• SATA/NVMe Hybrid: 2 SlimSAS x8 (each: 8 SATA3 or 2 NVMe)
• LAN: Dual 10GBase-T LAN ports; 1 RJ45 Dedicated IPMI LAN port
• USB: 6 USB 3.0 ports (4 rear + 2 via header)
• VGA: 1 VGA port
• Others: 1 COM port (rear); TPM 2.0 header
• Expansion Slots:  PCI-Express: 5 PCI-E 4.0 x16; 2 PCI-E 4.0 x8
• M.2: Interface: 2 PCI-E 4.0 x4; Form factor: 2280, 22110; Key: M-key
• Chassis (Optimized for H12SSL-NT):  1U: SC813MFTQC-R407CB
  2U: SC213AC-R1K23LPB; SC216BE1C4-R1K23LPB; SC826BE1C4-R1K23LPB
  3U: SC836BE1C-R1K23B
  4U: SC846BE1C-R1K23B
• System BIOS: BIOS Type: AMI 256Mb SPI Flash EEPROM
• BIOS Features: Plug and Play (PnP); DMI 2.3; PCI 2.2; ACPI 5.1; USB Keyboard Support; SMBIOS 3.1.1
• Software: Super Doctor 5; Watch Dog; NMI; SUM; IPMI 2.0, KVM with dedicated LAN
• Power Configurations: ACPI Power Management; Power-on mode control for AC power loss recovery
• CPU: Monitors CPU Core Voltages, +3.3V, +5V, +5V standby, +3.3V standby; CPU switching voltage regulator; Supports system management utility; VBAT
• FAN: Up to 7-fan status tachometer monitoring; Up to 7 4-pin fan headers; Dual Cooling Zone; Status monitor for speed control; Pulse Width Modulated (PWM) fan connectors
• Temperature: Monitoring for CPU and chassis environment; CPU Thermal Trip Support; Thermal control for 7x Fan connectors; IC Temperature Sensing Logic
• LED: CPU/ System Overheat LED
• Other Features: Chassis Intrusion Detection; Chassis Intrusion Header; UID
• Operating Temperature: 10C to 35C (50F to 95F)
• Non-operating Temperature: -40C to 70C (-40F to 158F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)
• Form Factor: ATX
• Dimensions: 12" x 9.6" (30.5cm x 24.4cm)