Hello Guest!
Your Cart

Black Box LES300 Series LES301A-KIT Industrial Serial Device Server Kit

Out of stock
SKU
LES301A-KIT
Special Price $146.27 Regular Price $190.15
Brands:

• Serial Baud Rate 1200 bps to 230 kbps
• Serial Data Bits 7, 8
• Serial Data Parity None, Odd, Even, Mark, Space
• Serial ESD Protection 15 kV
• Serial Flow Control None; Software: X-ON/X-OFF; Hardware: RTS/CTS
• Serial Stop Bits 1, 2
• Size 1.1"H x 2.6"W x 3.1"D (2.8 x 6.6 x 7.9 cm)
• Standard IEEE 802.3

Black Box LES300 Series LES301A-KIT Industrial Serial Device Server Kit

Use your Ethernet network to reliably access a remote RS-232 or RS-422/-485 industrial device from a remote workstation.The 1-Port 10/100 Device Server gives you a cost-effective gateway for TCP/IP Ethernet and serial signal communications, enabling nearly any serial device to be connected to a new or existing Ethernet network.It does this by encapsulating serial data and transporting it over Ethernet, communicating full-duplex and transmitting bidirectional data transparently between the serial port and a network.

In addition, the device server supports TCP server, TCP client, and UDP modes of communication, and serial tunneling, which you can use to send data between two serial devices via the TCP/IP link instead of RS-232, -485, or -422 connections. Link a touchscreen to a distant PLC over the Ethernet network, for instance.  Ideal for any manufacturing, process engineering, or automation application, the 1-Port 10/100 Device Server, RS-232/422/485 can also be used to communicate with a bar-code scanner, PLC, electronic Kanban inventory management device, and similar equipment on the factory floor.

• Features TCP server/client, UDP, virtual COM, and tunneling modes.
• Software-selectable RS-232/485/422 serial data communications.
• Ideal for controlling a manufacturing or automation device over a LAN.
• Auto MDI/MDI-X Ethernet port. Autonegotiates, autodetects for 10 or 100 Mbps.
• Rugged, metal case that can be wall or DIN rail mounted (mounts included).
• Firmware can be upgraded over an Ethernet network from a remote PC.
• On serial side, features 15-kV ESD protection.
• Access a single serial device over your Ethernet network.
• Software selectable for RS-232, RS-422, or RS-485.
• Includes external power supply
• DB9 male serial connector.
• Autosensing 10-/100-Mbps Ethernet port.
• Completely manageable through any Web browser or Telnet™.
• Supports SNMP manangement.

                Write Your Own Review
                You're reviewing:Black Box LES300 Series LES301A-KIT Industrial Serial Device Server Kit