Black Box LIE1014A Managed Industrial Gigabit Ethernet PoE+ Switch

This switch has eight 10/10/1000-Mbps PoE/PoE+ copper ports and four SFP ports for uplinks. This way you can power distant access points, security cameras, and other industrial equipment over the copper Ethernet lines at the far edges of your network where it's impractical to run electrical wires. The SFP fiber uplinks give you almost unlimited fiber distance options, depending on the SFP.

Advanced management features help minimize network downtime by enabling you to remotely diagnose and manage network problems. And you'll eliminate the need to send IT technicians on site—thus lowering costs. The switch is fully manageable through SNMP, a Web browser, Telnet, or a console port. Control the bandwidth on each port individually and set up Quality of Service (QoS) priority queuing for critical applications. 

The switch supports port-based VLAN and IEEE 802.1Q VLAN tagging, MAC-based trunking, IP-multicast IGMP snooping, rapid spanning tree for redundancy. Plus, it has 802.1x port-based authentication for security.

• Provides eight 10/100/1000-Mbps PoE+ RJ-45 ports and four multispeed Gigabit SFP slots
• Use to connect and power security cameras and access points
• Offers link loss recovery of <20-msec
• DIN rail or wall mount
• PoE 802.3af and PoE+ 802.3at compatible. Delivers up to 30W per port
• SFP ports enable single-mode or multimode Gigabit fiber uplinks over long distances
• IP30-rated housing is also rated for shock and vibration protection
• Manage through a Web interface, SNMP or command-line interface (CLI)
• Indicators LEDs: Power, Ethernet Port
• Connectors (8) RJ-45, 10/100/1000-Mbps, auto-negotiation, MDI-MDI-X auto-crossover; (4) 100/1000BASE SFP slots; (1) RJ 45 RS-232 console
• PoE Management Scheduling; power control; PoE PD power consumption
• Operating Mode Store and forward; L2 wire-speed, non-blocking switching engine