D-Link DGS-1510-28X 24 Port Gigabit Stackable Smart Managed Switch with 4 10GbE SFP+ ports

The DGS-1510 Series is D-Link’s latest generation of stackable Gigabit switches with 10G port connectivity, suitable for business networks of all sizes. The DGS-1510 Series provides a reliable, scalable, and modular interconnection between core switches and edge switches with rich capabilities and simplified flexibility. Available in 16, 24 and 48 10/100/1000 Mbps port models, these switches also include four optical ports – including two or four 10G SFP+ ports.

All 10/100/1000 Mbps ports on the DGS-1510-28P, DGS-1510-28XMP and DGS-1510-52XMP are PoE-enabled, for powering devices such as IP cameras, VoIP phones and wireless access points. Compliant with IEEE 802.3af and IEEE 802.3at, these models support up to 30W of power output on any particular PoE port. The total PoE power budgets are 193W for the DGS-1510-28P, and 370W for the DGS-1510-28XMP and DGS-1510-52XMP. Additionally, the power budget for the DGS-1510-52XMP can be increased to 740W when utilized with the DPS-700 redundant power supply, allowing the switch to power even more devices. Time-based PoE enables power to a port to be shut off at a scheduled time, reducing power usage and helping to increase security by powering off devices that should not be in use during non-business hours. A unique “PD-alive” feature, ideal for surveillance networks, pings attached PDs (IP Cameras, wireless access points) and resets the PoE power when inactivity is detected.

• Device Type Switch - 28 ports - L3 - managed - stackable
• Enclosure Type: Rack-mountable 1U
• Subtype Gigabit ; Ethernet
• Ports: 24 x 10/100/1000 + 4 x 10 Gigabit SFP+
• Performance Switching capacity: 128 Gbps ¦ Forwarding performance (64-byte packet size): 95.24 Mpps ¦ Stacking bandwidth: 20 Gbps
• MAC Address Table Size: 16000 entries
• Jumbo Frame Support : 9000 bytes
• Max Units : In A Stack 6
• Routing Protocol Static IPv4 routing, static IPv6 routing
• Remote Management Protocol SNMP 1, RMON 1, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, CLI
• Encryption Algorithm SSL, TLS, SSL 3.0, SSL 2.0, PEAP, TTLS
• Authentication Method RADIUS, Secure Shell v.2 (SSH2)