TRENDnet TPE-113GI Gigabit PoE Injector/Switch
• Supplies PoE (15.4W)
• Network a PoE device located up to 100 meters (328 ft.) away
• Converts a non-PoE Gigabit port to a PoE Gigabit port
• Dimensions : 67 x 51 x 25mm (2.6 x 2 x 1 in.)
• Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
TRENDnet TPE-113GI Gigabit PoE Injector/Switch
TRENDnet’s Gigabit PoE Injector, model TPE-113GI, combines electrical power with a Gigabit network connection. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE devices. Connect the injector to a non-PoE Gigabit switch and then run an Ethernet cable with data + power to network a PoE device up to 100 meters (328 ft.) away.
Supplies a PoE device with PoE (15.4W) power.Wall-mountable design accommodates most installation scenarios.Full Duplex 2Gbps Ethernet speeds with this PoE injector.Wall-mountable design accommodates most installation scenariosSupplies a PoE device with PoE (15.4W) powerNo configuration needed, simply connect a PoE network device.
• 1 x Gigabit Data In port
• 1 x Gigabit Data & Power out port
• 1 x Power Input
• LED indicator
• Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
• Gigabit: 2000Mbps (full duplex)
• PoE Delivery : Pin 1, 2 for power+ and pin 3, 6 for power- (mode A)
• Power : Input: 100 – 240V AC, 50/60Hz, 0.6A max.
• Power Consumption : Max. 15.4W
• Operating Temperature : 0° – 40° C (32° – 104° F)
• Operating Humidity : Max. 90% non-condensing
• Weight : 38g (1.34 oz.)